Guides Analysis and predictions

GTA 6 Best Settings for PS5 and Xbox: HDR, Blur and Aim

Last updated By Leonida Intel 5 min read

Quick answer

GTA 6 runs at 30fps on every console with no performance mode, so the best settings are about comfort and clarity. Set Motion Blur Strength to 0 in the Display tab, turn off Camera Shake in the Camera tab, turn the crash camera down, and redo the HDR calibration inside the game, because it ignores your console's HDR settings.

GTA 6 has no graphics modes. Every console runs it at 30fps, and the Display tab has no resolution, frame rate or quality presets. That doesn’t mean the settings don’t matter. A few minutes in the menu makes Leonida much sharper, brighter and easier on the eyes, and it fixes the two big complaints from launch week: the smeary picture and the gloomy HDR.

Open them from the pause menu: Settings, then use L1 and R1 (LB and RB on Xbox) to move between tabs.

The five settings to change first

  1. Display > Motion Blur Strength: 0. At 30fps, the blur smears everything when the camera swings round. Turning it off makes chases and shootouts far easier to follow. If 0 feels too juddery, 1 or 2 is a fair middle ground.
  2. Camera > Camera Shake: off. It jolts the view during explosions, crashes and gunfire. Turning it off steadies your aim and helps if you get motion sick.
  3. Crash camera: lowest. The slow-motion crash cam cuts away mid-chase and makes it harder to recover. The kill cam is less disruptive, so keep it if you like the drama.
  4. HDR Calibration: redo it in the game. See the HDR section below. This is the fix if GTA 6 looks too dark.
  5. Gameplay > Movement Speed. Running is a click of L3 now, and constant stick clicks get tiring. Raise the default movement speed so a full push of the stick covers ground faster.

Then make a manual save, because the game only autosaves after missions.

Fix the dark picture: best HDR settings

If GTA 6 looks murky at night, it’s probably not your TV. Display expert Vincent Teoh of HDTVTest found that GTA 6 ignores the HDR calibration saved on your PS5 or Xbox, and that the in-game sliders don’t behave the way their numbers suggest. Push Square, Wccftech and TechTimes all reported his findings.

To set it up:

  1. Go to Settings > Display > HDR Calibration.
  2. Ignore the step that asks you to make the Rockstar logo just visible.
  3. Judge the picture by the two sample images of the boat party instead. R1 switches between the light and dark versions.

Teoh’s starting values for a TV that reaches about 1,000 nits or more:

SliderSuggested start
Max Brightness2,000
Black Levels20
Paper White35

Why such a high Max Brightness? Teoh found the slider’s numbers aren’t real nits: at 1,000, the sun only reached about 600 nits, so 2,000 makes up the difference.

These are starting points, not gospel. Every screen and room is different, so nudge them until night streets keep their detail without the sky blowing out. On a cheaper TV with weak HDR, the defaults may be as good as it gets.

Still set your console up properly first: HDR on “On When Supported”, TV in Game Mode and resolution on Automatic. It won’t fix GTA 6 on its own, but your other games will thank you.

Everything else in the Display tab

  • Safe Zone: pull the HUD in if your TV cuts off the minimap or money counter.
  • Hit Effects Intensity: lower it to cut the screen flashes when you’re shot. The low-health and low-stamina effects have their own sliders.
  • Blood & Gore Intensity has three levels, and Dismemberment has its own on/off switch.
  • High Contrast Shaders: outlines enemies, allies and objects you can use in strong colours. Great for accessibility, and handy in busy firefights.
  • Focus trail colourblind mode: makes the Focus trail easier to see.

There’s no field of view slider, no film grain and no depth of field toggle. Output Lag notes the dark band at the edges of the screen is a built-in vignette that can’t be switched off.

Best aim settings

Aim lives in the Gameplay tab under Combat.

  • Targeting: Lock-On snaps to the nearest target, Partial (the default) pulls your aim towards targets without locking on, and Free Aim gives no help.
  • Aim Assist Strength: a separate slider that slows the reticle over a target. Keep it high on Partial for steadier tracking.
  • Shooting Assist, Drive-By Assist and Quick Draw all help. Leave them on unless you want fully manual gunplay.

Partial with aim assist high suits most players. If the shootouts are a real struggle, pair Lock-On with Accessible Combat from our difficulty settings guide.

If the camera feels slow, raise the look sensitivity in the Controller tab. Output Lag puts the default at 7 and says most players settle between 8 and 10, with Look and Aim Acceleration raised too.

TV settings

  • Game Mode on to cut input lag.
  • Motion smoothing off (TruMotion, Motion Plus, Motionflow and similar). It adds lag and smearing at 30fps.

PS5 Pro

There’s nothing extra to switch on. The Pro applies PSSR upscaling and ray-traced shadows automatically, and it still runs at 30fps, like every other console. Our PS5 Pro guide covers what’s different.

Next: beginner’s guide · full controls list · difficulty settings · first-person mode · all GTA 6 guides

Sources

FAQ

Does GTA 6 have a performance mode?

No. Every console, PS5 Pro included, runs GTA 6 at 30fps, and the Display tab has no resolution, frame rate or graphics mode options.

How do you turn off motion blur in GTA 6?

Pause, open Settings, go to the Display tab and drag Motion Blur Strength down to 0. If the camera feels too juddery at 30fps without it, try 1 or 2.

Why is GTA 6 so dark on PS5?

Usually it's the HDR calibration. GTA 6 ignores the HDR settings saved on your PS5 or Xbox, so set it up again in Settings > Display > HDR Calibration. HDTVTest's Vincent Teoh suggests Max Brightness 2,000, Black Levels 20 and Paper White 35 as a starting point for TVs of about 1,000 nits or brighter.

What's the best aim setting in GTA 6?

Targeting has three options: Lock-On, Partial (the default) and Free Aim. Partial suits most players. Pick Lock-On if shootouts feel hard, or Free Aim if you want no help at all.

How do you stop GTA 6 giving you motion sickness?

Set Motion Blur Strength to 0, turn off Camera Shake, turn the crash camera down and switch off your TV's motion smoothing.

Shop

GTA VI launch gear

The limited GTA VI DualSense controllers, storage for the pre-load, the album on vinyl and the hardware everyone's grabbing before 19 November.

Finding your local store…

Affiliate links possible GBP

As an Amazon Associate I earn from qualifying purchases. We may also earn from other store links, at no extra cost to you. How this works

See guide locations on the map

Explore every location from this guide and tick them off as you find them.

Open live map

From our sister channel

Watch on Pulse Gaming

Quick-fire GTA and gaming news Shorts, straight from YouTube.

Subscribe on YouTube (opens YouTube in a new tab)
settingshdrmotion blurps5xboxbeginners